Appendix C: Configuration or Firmware Upgrade with a USB Drive
552
fwupdate.cfg
The configuration file,
fwupdate.cfg, is an ASCII text file containing
key-value pairs, one per line.
Each value in the file must be separated by an equal sign (=), without any
surrounding spaces. Keys are not case sensitive.
Illustration:
This section only explains common options in the file.
Note: To use any options developed after version 2.2.13, the firmware
version running on your PX3 must be able to support them.
user
A required option.
Specify the name of a user account with Administrator Privileges.
For a PX3 with factory default configuration, set this option to
admin
.
password
A required option.
Specify the password of the specified admin user.
For a PX3 with factory default configuration, set this option to
raritan.
logfile
Specify the name of a text file where the PX3 will append the log
messages when interpreting the USB drive contents.
If the specified file does not exist in the USB drive, it will be
automatically created.
If this option is not set, no log message are recorded. The
disadvantage is that no feedback is available if the PX3 detects a
problem with the USB drive contents.
firmware
Specify the name of a firmware binary file used to upgrade your PX3.
The specified firmware file must be compatible with your PX3 and
have an official Raritan signature.
Summary of Contents for PX3-1000 series
