Instruction Manual
DE:
Bedienungsanleitung - de.startech.com
FR:
Guide de l'utilisateur - fr.startech.com
ES:
Guía del usuario - es.startech.com
IT:
Guida per l'uso - it.startech.com
NL:
Gebruiksaanwijzing - nl.startech.com
PT:
Guia do usuário - pt.startech.com
Manual Revision: 05/08/2019
For the most up-to-date information, please visit: www.startech.com
Packaging Contents
• 1x Slim ExpressCard
• 1x DC to USB Cable
• 1x 34mm to 54mm Stabilizer Bracket
• 1x Driver CD
• 1x Instruction Manual
System Requirements
• An available ExpressCard port
• Microsoft® Windows® XP(32/64-bit)/ Server 2003(32/64-bit)/
Vista(32/64-bit)/ Server 2008 R2/ 7(32/64-bit)/ 8(32/64-bit)
ECUSB3S11
1 Port Flush Mount SuperSpeed USB 3.0 ExpressCard
Driver Installation
Windows XP/Server 2003/Vista/7/Server 2008 R2/8
1. Upon starting Windows, if the “Found New Hardware” wizard
appears on the screen, cancel/ close the window or choose not
to install the drivers and insert the included Driver CD into the
computer’s CD/DVD drive.
2. AutoPlay should automatically launch, click to display the
contents on the CD. If not, open “Computer” (“My Computer” in
XP) and double-click on the CD/DVD.
3. Enter the folder “USB 3.0 Host”, then “NEC” and double-click the
file “Setup.exe”.
4. This should launch the driver Installation wizard. Continue
through the wizard and once complete, all the necessary drivers
will be installed.
Installation
Hardware installation
Turning the computer off to insert/remove ExpressCard is not
necessary as they are hot-pluggable.
The ExpressCard will simply slide into the ExpressCard slot on any
compatible system, label side up. Push the card all the way in, until
it ‘clicks’ and locks into place. To eject the card, simply push the card
further into the slot until it clicks, and then release and it will then be
automatically ejected from the slot.
NOTE:
Some ExpressCard/54 slots hold an ExpressCard/34 adapter
loosely, so movement of the computer or the adapter card can result
in accidental disconnection. A snap-on 34mm to 54mm stabilizer
bracket is included for such installations.
OPTIONAL:
For some high-powered USB 3.0 devices, additional
power may be required. Connect the USB to DC adapter cable from
a USB port on the computer system to the DC plug on the card. This
will provide additional power to the USB 3.0 port.
*actual product may vary from photos
