![background image](http://html1.mh-extra.com/html/omron/sysdrive-3g3mv-a2002/sysdrive-3g3mv-a2002_user-manual_742836199.webp)
7-5
n155
RS-422/485 Parity Selection
Register
019B
Hex
Changes during
operation
No
Setting
range
0 to 2
Unit of
setting
1
Default setting
0
Set Values
Value
Description
0
Even
1
Odd
2
No parity
In normal serial communications, data is configured in single bytes, and messages are
created by stringing together multiple bytes of data. The parity check described here
sets the check for each byte of data. Set the parity check method that is required by the
Master.
Note
The entire message is checked by a separate check code called “CRC-16,” so the
communications data will be checked even if no special parity check is performed.
H
Send Wait Time Setting (n156)
·
Set this parameter to an awaiting period for returning a response after the DSR (data-
send-request) message is received from the Master.
n156
RS-422/485 Send Wait Time
Register
019C
Hex
Changes during
operation
No
Setting
range
10 to 65 (ms)
Unit of
setting
1 ms
Default setting
10
Set Values
·
When the DSR message is received from the Master, the Inverter must wait for a com-
munications time of 24-bit length plus the set value in n156 before returning a
response.
Set this value according to the response time of the Master.
H
RTS Control Selection (n157)
·
Select whether or not to enable the RTS (request-to-send) communications control
function.
Communications
Chapter 7
Summary of Contents for SYSDRIVE 3G3MV A2002
