Omron CP1H CPU UNITS - PROGRAMMING 05-2007, Operation Manual

Page: 759 / 788

725
PLC Setup
Appendix G
Peripheral Service Settings
Set Time to All Events: Time Setting for Services
Built-in Input Settings
High Speed Counter Settings
Name Default Settings When setting is read
by CPU Unit
Internal
address
Bits Settings
1 Set time to all events Default Default
(4% of cycle time) At start of operation 218 15 0
Use user setting. 1
1-1 Time allocated to
services 0: 0
×
0.1 ms =
0 ms
0: 0
×
0.1 ms = 0 ms At start of operation 218 00 to
07 00 hex
: :
255: 255
×
0.1 ms FF hex
Name Default Settings When setting is read
by CPU Unit
Internal
address
Bits Settings
1 Use high speed counter 0 Do not use. Do not use. When power is turned
ON 50 12 to
15 0 hex
Use. 1 hex
1-1 Counting mode Linear mode Linear mode At start of operation 50 08 to
11 0 hex
Circular mode 1 hex
1-1-1 Circular
Max.
Count 0 0 At start of operation 52 and 51 00 to
15 0000
0000 hex
: :
4,294,967,295 FFFF
FFFF hex
1-2 Reset Z phase, soft-
ware reset Z phase, software reset When power is turned
ON 50 04 to
07 0 hex
Software reset 1 hex
Z phase, software reset
(comparing) 2 hex
Software reset (compar-
ing) 3 hex
1-3 Input Setting Differential
phase input Differential phase input When power is turned
ON 50 00 to
03 0 hex
Pulse + direction input 1 hex
Up/Down input 2 hex
Increment pulse input 3 hex
2 Use high speed counter 1 Do not use. Do not use. When power is turned
ON 53 12 to
15 0 hex
Use. 1 hex
2-1 Counting mode Linear mode Linear mode At start of operation 53 08 to
11 0 hex
Circular mode 1 hex
2-1-1 Circular
Max.
Count 0 0 At start of operation 55 and 54 00 to
15 0000
0000 hex
: :
4,294,967,295 FFFF
FFFF hex
2-2 Reset Z phase, soft-
ware reset Z phase, software reset When power is turned
ON 53 04 to
07 0 hex
Software reset 1 hex
Z phase, software reset
(comparing) 2 hex
Software reset (compar-
ing) 3 hex
2-3 Input Setting Differential
phase input Differential phase input When power is turned
ON 53 00 to
03 0 hex
Pulse + direction input 1 hex
Up/Down input 2 hex
Increment pulse input 3 hex