![background image](http://html1.mh-extra.com/html/omron/cp1h-cpu-units-programming-05-2007/cp1h-cpu-units-programming-05-2007_operation-manual_742081558.webp)
524
System Configuration
Section 9-3
9-3
System Configuration
9-3-1
System Configuration
9-3-2
Devices Required for Constructing a Network
The basic configuration for a 100Base-TX Ethernet System consists of one
hub to which nodes are attached in star form using twisted-pair cable. The
devices shown in the following table are required to configure a network with
100Base-TX-type CP1W-CIF41, so prepared them in advance.
Recommended Hubs
For detail on recommended devices for constructing a network, refer to
9-8-3
Network Installation
.
(3) Hub
CX-Programmer
CX-Integrator
(2) Twisted pair cable
(1) CP1W-CIF41
CP1L/CP1H Series PLC
Network device
Contents
(1) Ethernet Option Board
(CP1W-CIF41)
The Ethernet Option Board is a Communication Unit
that connects a CP1H series or CP1L series PLC to
100Base-TX Ethernet networks.
(They can also be used as 10Base-T.)
(2) Twisted-pair cable
This is twisted-pair cable for connecting 100Base-TX
type Ethernet Option Board to the hub, with an RJ45
Modular Connector at each end.
Use a category 3, 4, 5, or 5e UTP (unshielded twisted
pair) or STP (shielded twisted-pair) cable.
(3) Hub
This is a relay device for connecting multiple nodes in a
star LAN.
Summary of Contents for CP1H CPU UNITS - PROGRAMMING 05-2007
