Omron CP1H CPU UNITS - PROGRAMMING 05-2007, Operation Manual

Page: 458 / 788

424
Analog I/O Units
Section 7-4
Note Word (n + 1) can be used for either the range code or the analog output set
value.
Connecting the Analog I/O
Unit and Setting the DIP
Switch This section describes how to connect an Analog I/O Unit to the CPU Unit.
Setting the Averaging Function
DIP switch pins 1-1 and 1-2 are used to set the averaging function. When
averaging is enabled, a moving average of the last eight input values is output
as the converted value. The averaging function can be set separately for ana-
log inputs 1 and 2.
Wiring Analog I/O Devices Internal Circuits
DIP switch
pin
Function Setting Default
1-1 Averaging Analog input 0
OFF: Disabled; ON: Enabled
OFF
1-2 Analog input 1
OFF: Disabled; ON: Enabled
OFF
CPU Unit
CP1W-MAD11
CPM1A-MAD11
Analog I/O Unit
NC NC
Analog Inputs Analog Outputs
Analog ground
Input 0
Input 1
Analog ground
Output
Internal circuits
510 k
Ω
510 k
Ω
510 k
Ω
510 k
Ω
250 k
Ω
250 k
Ω
COM0 (
−
)
V IN0
V IN1
COM1 (
−
)
Internal circuits
COM (
−
)
V OUT
I OUT
AG
NC
NC
I IN0
I IN1