Omron CP1H CPU UNITS - PROGRAMMING 05-2007, Operation Manual

Page: 684 / 788

650
Auxiliary Area Allocations by Address
Appendix D
A295 A295.11 No END Error
Flag
ON when there isn’t an END(001)
instruction in each program within a
task.
CPU Unit operation will stop and the
ERR/ALM indicator will light when
this flag goes ON.
(The task number where the error
occurred will be stored in A294 and
the program address will be stored in
A298 and A299.) ON: No END
OFF: Normal
condition
Cleared Cleared --- A294,
A298/
A299
A295.12 Task Error
Flag
ON when a task error has occurred.
The following conditions generate a
task error.
There isn’t even one regular task that
is executable (started).
There isn’t a program allocated to
the task.
(The task number where the error
occurred will be stored in A294 and
the program address will be stored in
A298 and A299.)
ON: Error
OFF: Normal
Cleared Cleared --- A294,
A298/
A299
A295.13 Differentiation
Overflow Error
Flag
The allowed value for Differentiation
Flags which correspond to differenti-
ation instructions has been
exceeded. CPU Unit operation will
stop and the ERR/ALM indicator will
light when this flag goes ON.
(The task number where the error
occurred will be stored in A294 and
the program address will be stored in
A298 and A299.) ON: Error
OFF: Normal
Cleared Cleared --- A294,
A298/
A299
A295.14 Illegal Instruc-
tion Error Flag
ON when a program that cannot be
executed has been stored. CPU Unit
operation will stop and the ERR/ALM
indicator will light when this flag goes
ON. ON: Error
OFF: Normal
Cleared Cleared --- A294,
A298/
A299
A295.15 UM Overflow
Error Flag
ON when the last address in UM
(User Memory) has been exceeded.
CPU Unit operation will stop and the
ERR/ALM indicator will light when
this flag goes ON. ON: Error
OFF: Normal
Cleared Cleared --- A294,
A298/
A299
A298 All Program
Address
Where Pro-
gram Stopped
(Rightmost 4
digits)
These words contain the 8-digit
binary program address of the
instruction where program execution
was stopped due to a program error.
(A294 contains the task number of
the task where program execution
was stopped.)
Right 4 digits
of the pro-
gram address Cleared Cleared --- A294
A299 All Program
Address
Where Pro-
gram Stopped
(Leftmost 4
digits) Left 4 digits of
the program
address Cleared Cleared ---
A300 All Error Log
Pointer When an error occurs, the Error Log
Pointer is incremented by 1 to indi-
cate the location where the next error
record will be recorded as an offset
from the beginning of the Error Log
Area (A100 to A199).
The Error Log Pointer can be cleared
to 00 by turning A500.14 (the Error
Log Reset Bit) ON.
When the Error Log Pointer has
reached 14 hex (20 decimal), the
next record is stored in A195 to A199
when the next error occurs. 00 to 14
hexadecimal Retained Retained Refreshed
when error
occurs.
A500.14
Address Name Function Settings Status
after
mode
change
Status
at star-
tup
Write
timing
Related
flags, set-
tings
Words Bits