NXP Semiconductors MPC5605BK, Reference Manual, Page: 785 / 964

Chapter 29 Cross Triggering Unit (CTU)
MPC5606BK Microcontroller Reference Manual, Rev. 2
Freescale Semiconductor 785
CTU channel mapping should be taken into consideration when programming an event configuration
register. For example, if the channel value of any event configuration register is programmed to 16, it will
actually correspond to ADC channel 32 and conversion will occur for this channel.
ADC0_S[14] CH46 46
ADC0_S[15] CH47 47
ADC0_S[16] CH48 48
ADC0_S[17] CH49 49
ADC0_S[18] CH50 50
ADC0_S[19] CH51 51
ADC0_S[20] CH52 52
ADC0_S[21] CH53 53
ADC0_S[22] CH54 54
ADC0_S[23] CH55 55
ADC0_S[24] CH56 56
ADC0_S[25] CH57 57
ADC0_S[26] CH58 58
ADC0_S[27] CH59 59
ADC0_X[0] CH64 : CH71 64:71
ADC0_X[1] CH72 : CH79 72:79
ADC0_X[2] CH80 : CH87 80:87
ADC0_X[3] CH88 : CH95 88:95
Table 29-4. CTU-to-ADC channel assignment (continued)
10-bit ADC 12-bit ADC
10-bit ADC_0
signal name
10-bit ADC_0
channel #
Channel # in
CTU_EVTCFGRx
12-bit ADC_1
signal name
12-bit ADC_1
channel #
Channel # in
CTU_EVTCFGRx