GRAUPNER mx-20 Hott, Programming Manual

Page: 227 / 296

227 Detail program description - Control adjust
Make sure that you do not enter a value which is too
low, so that you still have suffi cient time to safely land
your model in the event of a battery warning.
Simultaneously pressing the arrow keys

or

of the right touch pad ( CLEAR ) switches back to the
factory default values 4.7 or 3.4 V in the inverse fi eld.
Power-on warning
SEL
Ni-MH
4.7V
Batterie type
Batterie war ning
BASIC SETTINGS
Power-on beep yes
Power on war n. unlim
In this line you can determine how long the transmitter
should wait after the last actuation of an operating
element until the activation of an optical and acoustic
power-on warning before the transmitter switches off
automatically one minute later.
The values "unlim(ited)", "30 s" and 1, 5, 10, 20, 30 and
60 minutes are optional selections.
Simultaneously pressing the arrow keys

or

of
the right touch pad ( CLEAR ) switches to "unlimited" in
the inverse fi eld.
Notice:
In order to be able to restart the transmitter after
automatic shut-off, slide the power switch of the
transmitter fi rst towards the display, to the "OFF" position
and, after approx. fi ve seconds, back towards the
antenna to the "ON" position.
Touch sensitivity
SEL
Ni-MH
4.7V
2
Batterie type
Batterie war ning
Touch Sense
BASIC SETTINGS
Power on war n. unlim
In this line you can select the touch sensitivity of the
touch pads in a range from 1 to 10.
Simultaneously pressing the arrow keys

or

of
the right touch pad ( CLEAR ) resets to "2" in the inverse
fi eld.
Region
SEL
4.7V
2
Euro
Batterie war ning
Touch Sense
Region
BASIC SETTINGS
Power on war n. unlim
The region is needed for compliance with various
regulations (FCC, ETSI, IC etc.). In France, for example,
the operation of a remote control is only permitted within
a limited frequency band. Therefore, the region setting of
the transmitter
MUST be switched to "France" mode
as soon as it is operated in France . In no case may
the Universal/EURO mode be used in France!
Simultaneously pressing the arrow keys

or

of the right touch pad ( CLEAR ) resets to "Euro" in the
inverse fi eld.
Voice volume
SEL
2
Euro
3
Touch Sense
Region
Voice volume
BASIC SETTINGS
Power on war n. unlim
The volume of the voice output through the earpiece
connection is defi ned in a range of "0" to "10" in this line.
Simultaneously pressing the arrow keys

or

of
the right touch pad ( CLEAR ) resets to "3" in the inverse
fi eld.
Beep volume
SEL
2
Euro
3
3
Touch Sense
Region
Voice volume
Beep volume
BASIC SETTINGS
The volume of the transmitter's internal beep generator
is defi ned in a range from "0" to "6" in this line.
Simultaneously pressing the arrow keys

or

of
the right touch pad ( CLEAR ) resets to "3" in the inverse
fi eld.