GRAUPNER mx-20 Hott, Programming Manual

Page: 158 / 296

158 Detail program description - Control adjust
0%
AILE
0%
+100%
+100%
fl.pos
Nor mal
Diff.
Ail-tr
AI
0%
FLAP
0%
0%
0%
fl.pos
Nor mal
Diff.
Ail-tr
AI
On this line, you set the aileron differential, plus the
differential for the FLAP and FLAP2 wing fl aps – if the
latter are being activated as ailerons.
0% (normal)
50% (differential)
100% (split)
AI
FL
FL2
FL2
FL
AI
If you are unsure about the meaning of differential travel,
please read the appropriate explanation at the start of
this section on page 148.
The adjustment range of -100% to +100% makes
it possible to set the correct direction of differential
regardless of the direction of rotation of the aileron and
fl ap servos.
If you tap the

or

keys on the right touch
pad ( CLEAR ) at the same time, this will reset values
changed in the active (highlighted) fi eld back to the
default value (see screen image).
fl .pos (wing fl ap position)
0%
AILE
0%
+100%
+100%
fl.pos
Nor mal
Diff.
Ail-tr
AI
0%
FLAP
0%
0%
0%
fl.pos
Nor mal
Diff.
Ail-tr
AI
Here, you set the fl ight phase-specifi c wing fl ap
positions for all of the fl aps present on the model in
question. In this way, you can specify the fl ap positions
that apply to each fl ight phase.
The adjustment range of -100% to +100% makes it
possible to set the correct direction of travel regardless
of the direction of rotation of the aileron and fl ap servos.
If you tap the

or

keys on the right touch
pad ( CLEAR ) at the same time, this will reset values
changed in the active (highlighted) fi eld back to the
default value (see screen images).

FL

(Effects of fl ap controls)
In this line, you specify the percentage rate with which
the settings for input 6 (as made on the "
Control
adjust " menu, page96, and potentially dependent on
fl ight phase) will affect the wing fl ap positions of the
aileron and camber-changing fl aps.
0%
0% 0%
AILE
0%
+100%
FL
fl.pos
Nor mal
Diff.
Ail-tr
0%
+100% +100%
FLAP
0%
0%
FL
fl.pos
Nor mal
Diff.
Ail-tr
For each fl ap pair, you can defi ne either a symmetrical
or an asymmetric effect. Position the transmitter control
accordingly – either centrally or to the relevant side.
If you leave (or have left) each travel adjustment at
+100% on the "
Control adjust " menu (page 96), then
values between 5% and 20% should generally be
suffi cient.
If you tap the

or

keys on the right touch
pad ( CLEAR ) at the same time, this will reset values
changed in the active (highlighted) fi eld back to the
default value (see screen images).
Note:
By default, NO transmitter control is assigned to input 6