GRAUPNER mx-20 Hott, Programming Manual

Page: 29 / 296

29 Transmitter description - Hidden mode
packet downloaded from the transmitter's web page (e.g.
"voice_gb.vdf") into the folder created by the transmitter.
Now take the memory card out of the card reader and
re-insert it into the transmitter. Once the memory card is
inserted in the transmitter, switch the transmitter on
with
RF switched off .
RF on/off?
ON
Please select
OFF
Language change
Use the left or right arrow touch key to select the line
"VOICE".

HIDDEN MODE

CONTRAST
LANGUAGE 0
VOICE DEUTSCH
STICK CALI.
ENGLISH
Activate language selection by pressing the center SET
key in the right touch pad.

HIDDEN MODE

CONTRAST
LANGUAGE 0
VOICE
STICK CALI.
ENGLISH
DEUTSCH
Now use the right touch pad arrow keys to replace the
default language "DEUTSCH" with the language you
want. For example:

HIDDEN MODE

CONTRAST
LANGUAGE 0
VOICE
STICK CALI.
ENGLISH
ENGLISH
Confi rm your selection with another tap on the center
SET key in the right touch pad. The selected language
packet will be loaded into the transmitter's memory.

HIDDEN MODE

CONTRAST
LANGUAGE 0
VOICE
STICK CALI.
ENGLISH
ENGLISH
22/100%
I
The loading process is fi nished as soon as the progress
bar at the lower edge of the display disappears.

HIDDEN MODE

CONTRAST
LANGUAGE 0
VOICE
STICK CALI.
ENGLISH
ENGLISH
When this process is fi nished, switch off the transmitter.
All settings stored in the transmitter remain intact after a
change of language has been made.
Notice:
If the warning … •
RF
MUST BE
OFF
OK
… appears, then the transmitter's RF radiation is still
active. Jump to the "
Basic settings " menu, select
the "RF transmit" line, select its "OFF" option and
then repeat the procedure
If the warning …
•
SD-CARD
INSERT
OK
… appears then the transmitter does not detect a memory
card in its card slot or the card found cannot be read.
If the warning …
•
MISSING
IMPORT
DATA
OK
… appears then the transmitter could not fi nd an
appropriate fi le on the inserted memory card.
JOYSTICK CALIBRATION
If you feel the neutral position of your self-calibrating
joysticks (controls 1 … 4) are not exactly 0 % of
their control travel, then this can be checked and, if
necessary, corrected as follows.
Jump to the "
Model select " menu and initialize a free
model memory as described on page 60. Whether the
model to be initialized is a winged aircraft or a helicopter
is irrelevant.