GRAUPNER mx-20 Hott, Programming Manual

Page: 232 / 296

232 Detail program description - Control adjust
Code lock
Locking of the multifunction list
Scroll with the arrow keys of the left or right touch pad to
the menu item ...
Telemetr y
info display
Basic settings
Ser vo display
Ser vo test
Code lock
… of the multifunction menu. By briefl y pressing the
central
SET key of the right touch pad, this menu item
opens:
CODE LOCK
D e s i r e d ( n ew )
s e c r e t nu m b e r
(_ )
SET
3 2 1 3 4
Access to the multifunction menu can be locked for
unauthorized use by a four-digit secret code comprised
of the numbers 1 to 4, which you enter according to the
scheme shown in the display with the arrow keys of the
left touch pad; for example :
(123_)
CLR
3 2 1 3 4
CODE LOCK
D e s i r e d ( n ew )
s e c r e t nu m b e r
As soon as you not enter the fourth number by pressing
one of the other arrow keys of the left touch pad, the
following notice appears in the display:
7 8 9 10 11 12
STO
FAIL SAFE
Pos
hold
DELAY : 0.25s
By briefl y pressing the central ESC key of the left touch
pad, you confi rm the secret code and leave the menu .
By briefl y pressing the central SET key of the right touch
pad, on the other hand, you confi rm the active CLR fi eld
in the bottom right in the display and thereby delete the
number you entered .
Make note of the secret code and keep it safe.
Otherwise, the transmitter must be sent in to
Graupner Service for decoding.
The lock becomes active the next time the transmitter
is switched on. However, the control remains ready
for operation. Calling the multifunction list and thereby
a model change, for example, is no longer possible
without entering the correct number combination:
(_ )
SET
3 2 1 3 4
CODE LOCK
D e s i r e d ( n ew )
s e c r e t nu m b e r
A renewed attempt following an incorrect entry is only
possible after the lapse of a time-out.
(123_)
CLR
3 2 1 3 4
CODE LOCK
D e s i r e d ( n ew )
s e c r e t nu m b e r
Input error
Time lock
Deletion of the secret code
If the secret code should be deleted again at a later
point in time, after opening this menu, immediately press
the central
SET key of the right touch pad twice :
(1234)
CLR
3 2 1 3 4
CODE LOCK
D e s i r e d ( n ew )
s e c r e t nu m b e r
The fi rst time you press the central SET key of the right
touch pad, the secret code is deleted ( CLR ):
1.234
2048MB
2011/02/01(Mo )
11:22:33s
1234MB
fir mware ver.
date
time
SD-Card
available
And the second time you press the key the empty input
fi eld is confi rmed (
SET ). The display shows: