GRAUPNER mx-20 Hott, Programming Manual

Page: 37 / 296

37 Transmitter description - Function fi elds, position indicator and entry lockout
As soon as one of the proportional controls (CTRL 7 & 8)
in the middle console is turned, a small symbol will appear
to the left of the two vertical position indicators.
At the same time, for the duration of the control's
operation, the position indicator for the two vertical bars
in the middle will change from displaying current trim
position to a display of the respective current position of
the proportional controls CTRL 7 & 8.
Logically, the left proportional control (CTRL 7) is
displayed by the left bar indicator and the right bar
indicator displays the position of the right proportional
control (CTRL 8). The two horizontal bars continue to
show current trim positions of respective joystick trim
controls.
GRAUBELE
#01
3:33h
Stop
Flt
K78
0:00
0:00
RX0.0V
5.2V
M
HoTT
About 2 seconds after operating one of the proportional
controls has ended, the display will again revert to
display of current trim positions of the four trim controls
generated by the two joysticks.
Position indicator
Proportional controls, CTRL 7 and 8
The touch keys can be locked out to prevent unintended
access and operation of settings. This lockout is
established (when the mx-20 HoTT transmitter is
displaying its base screen) by simultaneously pressing
and holding both the
ESC and SET keys for about two
seconds. This lockout condition is indicated by a key
symbol, located at the intersection point of the trim bars,
which is displayed in reverse video.
GRAUBELE
#01
3:33h
Stop
Flt
«nor mal »
K78
0:00
0:00
5.5V
5.2V
M
HoTT
The lockout is effective immediately but controls remains
operationally ready.
The lockout can be removed by again touching and
holding the
ESC and SET keys for about two seconds.
A lockout condition is also removed the next time the
transmitter is switched on.
Function fi elds in the display
SEL , STO , SYM , ASY , ,
Entry lockout
Depending on the given menu, certain function fi elds will
appear on the bottom display line.
CLR SEL STO SYM ASY
A marked function is activated by tapping on the SET
key.
Function fi elds
CLR • (clear) delete
SEL • (select): selection
STO • (store): store (e. g. control position)
SYM • set values symmetrically
ASY • set values asymmetrically
• switch symbol fi eld
(assignment of all types of switches)
• within a menu, change to the
second page (menu continuation)