GRAUPNER mx-20 Hott, Programming Manual

Page: 113 / 296

113 Detail program description - Control adjust
use the

key on the left or right touch pad to move
to the right beyond the Dual Rate value column, until
the word "DUAL" (shown roughly in the middle of the
display) changes to "EXPO":
0%
0%
0%
EXPO
–––
–––
–––
SEL
Roll
Nick
Tail
If you want to be able to switch between two variants,
assign a switch in the column marked with the switch
icon
at the lower edge of the display, as described
in the section "Assigning transmitter controls, switches
and control switches" (page 52):
0%
100%
100%
Roll
Nick
SR
DUAL
–––
–––
–––
SEL
nor mal
Move desired switch
to ON position
(ext. switch: SET )
The switch so assigned appears on the display, together
with a switch icon that indicates the switch's respective
switching direction.
With "G" switches from the "expanded switches" menu,
the joystick or another transmitter control acts as the
switch itself. However, the control switch in question
must be defi ned appropriately beforehand on the
"
Control switches " menu (see page 123).
Whichever switch has been assigned … the respective
switch appears on the display together with a switch icon
that indicates the switch's respective direction when moved.
icon at the lower edge of the display, as described
in the section "Assigning transmitter controls, switches
and control switches" (page 52 ):
100%
100%
100%
Roll
Nick
SR
DUAL
–––
–––
–––
SEL
nor mal
Move desired switch
to ON position
(ext. switch: SET )
The switch so assigned appears on the display, together
with a switch icon that indicates the switch's switching
direction.
With "G" switches from the "expanded switches" menu,
the joystick or another transmitter control acts as the
switch itself. However, this kind of control switch must
be defi ned appropriately beforehand on the "
Control
switches " menu (see page 123).
Whichever switch has been assigned …
the respective switch appears on the display together
with a switch icon that indicates the switch's respective
direction when moved.
100%
100%
100%
Roll
Nick
Tail
DUAL
3
–––
–––
SEL
nor mal
If you select the right-hand column at the lower edge
of the display marked with
SEL and activate the value
fi eld by briefl y tapping the center SET key on the right
touch pad, you can use the arrow keys on the left or
right touch pad to alter the Dual Rate value shown in the
highlighted fi eld separately for each of the two switch
positions:
100%
100%
DUAL
3
–––
–––
SEL
nor mal
111% Roll
Nick
Tail
100%
100%
DUAL
3
–––
–––
SEL
nor mal
88% Roll
Nick
Tail
If you tap the

or

keys on the right touch
pad ( CLEAR ) at the same time, this will reset a value
changed in the highlighted fi eld back to 100%.
Caution:
For safety reasons, you should not set Dual Rate values
lower than 20%.
Some examples of Dual Rate values:
Ser
v
o
tr
a
v
el
Ser
v
o
tr
a
v
el
Ser
v
o
tr
a
v
el
Stick deflection Stick deflection Stick deflection
Dual Rate = 100%
Dual Rate = 50% Dual Rate = 20%
Exponential function
If you want to be able to switch between two variants,