GRAUPNER mx-20 Hott, Programming Manual

Page: 155 / 296

155 Detail program description - Control adjust
FL
0%
0%
fl.pos
EL FL 0% 0%
0%
AILE
Nor mal
Diff. 0%
Ail-tr
AI +100%
+100%
… are shown, and – one "step" to the right – all options
for the fl ap pair as well:
0%
+100%
0% 0%
+100%
FLAP
0%
0%
0%
FL
fl.pos
EL FL
Nor mal
Diff.
Ail-tr
AI
Moving one further column to the right, however – to the
"FLAP2" column – is not possible.
Model type: "2AIL 4FL"
If you connect the servos to the receiver as described
on page 57 and select them appropriately on the "
Model
type " menu (see page 82), then the abbreviations "AI",
"FL" and "FL2" refer to the following fl aps:
AI
left
FL
left
FL2
left
FL2
right
FL
right
AI
right
Since the options available on the "wing mixer menu"
and its sub-menus vary according to the number of fl ap
servos specifi ed on the "
Model type " menu (page 82 ),
the list contains only the set-up options that are possible
for your model configuration.
This means that if values are preset to "2AIL 4FL", then
all confi guration options for the aileron pair …
FL
0%
0%
fl.pos
EL FL 0% 0%
0%
AILE
Nor mal
Diff. 0%
Ail-tr
AI +100%
+100%
… are shown, and – one "step" to the right – all options
for the fi rst fl ap pair …
0%
+100%
0% 0%
+100%
FLAP
0%
0%
0%
FL
fl.pos
EL FL
Nor mal
Diff.
Ail-tr
AI
… are shown, and – one further "step" to the right – all
options for the second fl ap pair as well:
0%
+100%
0% 0%
+100%
FLAP2
0%
0%
0%
FL
fl.pos
EL FL
Nor mal
Diff.
Ail-tr
AI
Model type: "4AIL 2FL"
If you connect the servos to the receiver as described
on page 57 and select them appropriately on the "
Model
type " menu (see page 82), then the abbreviations "AI",
"AI2" and "FL" refer to the following fl aps:
AI
left
AI2
left FL
left
FL
right
AI2
right
AI
right
Since the options available on the "wing mixer menu"
and its sub-menus vary according to the number of fl ap
servos specifi ed on the "
Model type " menu (page 82 ),
the list contains only the set-up options that are possible
for your model configuration.
This means that if values are preset to "4AIL 2FL", then
all confi guration options for the fi rst aileron pair …