GRAUPNER mx-20 Hott, Programming Manual

Page: 289 / 296

289 Detail program description - Control adjust
Enhancement recommendation:
Rotational speed regulator
At some point in time you may want to install a
rotational speed regulator in the helicopter, such as
mc-Heli-Control, in order to be able to fl y with speeds
automatically kept at a constant. In the process, it is
logical to couple the individual rotational speeds with the
fl ight phases so that further additional adjustments are
possible.
It is mandatory for the transmitter-side programming
that the rotational speed regulator was installed
and programmed according to the manufacturer's
instructions. Of course, the
mx-20
HoTT also enables
further possibilities for the realization of different speeds
in the individual phases. For a practical recommendation
with maintenance of the throttle limiter function, see the
description beginning on page 169.
If you have adjusted your helicopter according to
this programming principle, it is not yet a competition
helicopter, but it already permits sophisticated fl ying.
You should only activate additional functions if the model
fl ies faultlessly so that the (desired) improvements
are also easy to follow. Insofar as possible, activate
individual functions on an individual basis so that you
can actually recognize and attribute the change. Bear
in mind that it is not the quantity of functions used that
distinguishes good pilots, but what they can do in terms
of fl ying with relatively little.