GRAUPNER mx-20 Hott, Programming Manual

Page: 154 / 296

154 Detail program description - Control adjust
Model type: "2/4AIL 1/2/4FL"
If you have entered "2AIL 1FL" for the "Aile/fl aps"
line on the "
Model type " menu (page 82), then the
"Wing mixers menu" on your transmitter will match the
following screen image:
Aile.diff.
Brake settings
0%
AI 0%
WING MIXERS
FL EL 0% 0%
–––
––– RU
Multi-flap menu
Nor mal
If, on the other hand, you have entered "2/4AIL
1/2/4FL" for the "Aile/fl aps" line on the "
Model type "
menu (page 82), then the "Wing mixers menu" on your
transmitter will show the following:
0%
0%
0%
–––
–––
Brake settings
AI
WING MIXERS
FL EL
RU
Multi-flap menu
Nor mal
Regardless of the combination of aileron and fl ap servos
you choose, all of the parameters available can be
adjusted separately for each fl ight phase.
Note:
For almost any menu option, you have the option of
checking your settings by switching to the servo display
screen, which is accessed by simultaneously tapping
the arrow keys

on the left touch pad. If you do, note
however that the vertical lines on the " Servo display "
move in the same direction for ailerons and in the
opposite direction for fl aps.
Before we address the details of this menu we would
like to provide a brief explanation of the different display
modes for the multi-flap menu:
Model type: "2 AIL 1 FL"
If you connect the servos to the receiver as described
on page 57 and select them appropriately on the "
Model
type " menu (see page 82), then the abbreviations "AI"
and "FL" refer to the following fl aps:
AI
left
FL FL AI
right
Since the options available on the wing mixer menu
and its sub-menus vary according to the number of fl ap
servos specifi ed on the "
Model type " menu (page 82),
the list contains only the set-up options that are possible
for your model configuration.
FL
0%
0%
fl.pos
EL FL 0% 0%
0%
AILE
Nor mal
Accordingly, with values preset to "2AIL 1FL", the
options to set aileron functions for fl aps will be hidden
and it will be possible to move only one column to the
right, into the column "FLAP":
FL +100%
fl.pos
EL FL 0% 0%
+100%
FLAP
Nor mal
0%
In addition, the settings for "Aile(ron) diff(erential)" are
not found on the "multi-fl ap menu", as with "2AIL 2/4FL",
but one level higher in the "Wing mixers" menu – see the
screen-shot at top left.
Model type: "2AIL 2FL"
If you connect the servos to the receiver as described
on page 57 and select them appropriately on the "
Model
type menu (see page 82), then the abbreviations "AI"
and "FL" refer to the following fl aps:
AI
left
FL
left
FL
right
AI
right
Since the options available on the "wing mixer menu"
and its sub-menus vary according to the number of fl ap
servos specifi ed on the "
Model type " menu (page 82),
the list contains only the set-up options that are possible
for your model configuration.
This means that if values are preset to "2AIL 2FL", then
all confi guration options for the aileron pair …