GRAUPNER mx-20 Hott, Programming Manual

Page: 36 / 296

36 Transmitter description - Warning notices
Warning notices
BIND N/A
OK
"Bind not available"
A receiver has not yet been
bound to the currently active
model memory. Briefl y touching
the
SET key will cause a direct
jump to the appropriate option.
RF on/off?
OFF ON
Please select
Please select RF transmission
"ON" or "OFF".
b a t t e r y
n e e d s
c h a r g i n g
Operating voltage is too low
Fail Safe
setup
t.b.d.
Failsafe has not yet been
activated
MISSING
IMPORT
DATA
OK
A suitable language fi le
cannot be found on the
memory card
Throttle
too
high !
Helicopter throttle joystick or
limiter too high
RF
MUST BE
OFF
OK
Prompt to switch off RF
transmission
(language fi le can only be
loaded when RF is
switched off )
Warning notices
CAN‘T
RECEIVE
DATA
OK
No bound receiver in range
No
pupil
signal
Connection between teacher
and pupil is interrupted
SD-CARD
INSERT
OK
No SD or SDHC memory card
in the card slot or card is not
legible
Is the "wireless teacher/pupil connection" that was •
active when the transmitter was last used to be
continued,
CONT or switched off OFF ?
TRAINER
Wireless Link
ACT INH
After being switched on, the transmitter has not •
been used within the time limit preset in the "Power-
on beep" line of the "
Basic Settings " menu, see
page 227. The message …
Power on waning
is active!
… will appear in the screen, the center LED will
alternately blink red and blue and an acoustic
warning tone will sound.
If the transmitter continues unused it will
autonomously switch itself off after one minute.
When battery voltage is too low, a model change is
•
blocked for reasons of safety. The screen will show
an appropriate message.
not possible now
voltage too low