GRAUPNER mx-20 Hott, Programming Manual

Page: 252 / 296

252 Detail program description - Control adjust
SEL
0%
0%
0%
C1
C2
C3
––– C4
CONTROL SWITCH
–85%
STO
–––
–––
––– Ct1
In order to assign the control switch you just crated to
the desired timer, switch to the menu ...
""Timers (gen.)" (page 138 … 141)
…, and, with the arrow keys, select the line "Top", to
which the "Tim(ers)" are assigned by standard. In this
line, move the marking frame over the "Timer" column to
the right, to the column above the switch symbol, using
the appropriate arrow key of the left or right touch pad.
Now press the central
SET key of the right touch pad
twice: Pressing once activates the switch assignment
and tapping again opens the list of the "expanded
switches":
Model time
Akkuzeit
Oben:
Mitte: Flug
Alar m
––– 0:34h
1:23h
0s
0s Stopp –––
–––
SEL
Control/fix sw
C1 C2 C3 C4 FX
FXi C1i C2i C3i C4i
Now select the previously programmed control switch,
Ct1 in the example, and assign it to the timer by briefl y
pressing the central
SET key of the right touch pad:
Model time
Batt. time
Top :
Centr : Flight
Alar m
––– 0:34h
1:23h
0s
0s Stop C1
–––
SEL
The timer in the base screen now starts with movement
of the C1 joystick toward full throttle and stops if you pull
the C1 joystick back over the switching point.
Example 1 of the preceding pages
If you have decided to continue with the model
programming described on the previous pages in
Example 1 on page 244, fi rst switch to the menu ...
"Control switches" (page 123)
… and select the line of a control switch which has not
been assigned yet with the arrow keys. After activation
of the control assignment by briefl y pressing the central
SET key of the right touch pad, the following window
appears:
SEL
+75%
0%
0%
G1
G2
C3
––– C4
CONTROL SWITCH
Gb1
Gb1 –75%
STO
–––
–––
–––
Move desired
control adj.
Now simply move the respective proportional rotary
control, e.g. CTRL 7, from the motor "OFF" position in
the motor "ON" direction.
The switch to the column above
STO using the
appropriate arrow key and move the selected control
near the motor "OFF" position and defi ne the switch
Examples 4 and 5 of the preceding pages
If you have decided to continue with the model
programming on described on the previous pages for
Example 4, page 247 or 5, page 250 or you intend to
use the C1 joystick (throttle/brake joystick) for the power
regulation completely independently of this example
programming, you can use a control switch for the
automatic starting and stopping of the timer. For this
purpose, fi rst switch to the menu …
"Control switches" (page 123)
… and select the line of a control switch which has not
been assigned yet with the arrow keys. After activation
of the control assignment by briefl y pressing the central
SET key of the right touch pad, the following window
appears:
SEL
+75%
0%
0%
G1
G2
C3
––– C4
CONTROL SWITCH
Gb1
Gb1 –75%
STO
–––
–––
–––
Move desired
control adj.
Now simply move the C1 joystick (throttle/brake joystick)
from the motor "OFF" position in the motor "ON"
direction.
The switch to the column above
STO using the
appropriate arrow key and move the C1 joystick near the
motor "OFF" position and defi ne the switch point at the
selected position by briefl y pressing the central
SET key
of the right touch pad. The switch status is shown to the
right of the control number:
Timer confi rmation with control or switch