GRAUPNER mx-20 Hott, Programming Manual

Page: 290 / 296

290 Appendix
Vario module Graupner HoTT
Order No. 33601
Vario with altitude signals and 5 ascend and descend signal tones
each, altitude display and memory of the min. and max. altitude
Additional warning thresholds for min. altitude, max. altitude, rate of •
ascend and descend in two stages
Adjustable warning time: OFF, 5, 10, 15, 20, 25, 30 seconds, always
•
Adjustable warning repetition time: Always, 1, 2, 3, 4, 5 min, once •
The Vario sensor can be connected directly at the telemetry input of •
the receiver.
Technical data
Altitude measurement: -500 m … +3000 m •
Resolution: 0.1 m •
Vario sensitivity: 0.5 m/3s, 1 m/3 s, 0.5 m/s, 1 m/1 s, 3 m/s •
programmable by tone
Average calculation: 4 - 20 measurements programmable per
•
measurement value
PRX (Power for Receiver)
Order No. 4136
Highly developed, stabilized receiver current supply with intelligent
power management.
The unit ensures a stabilized and adjustable current supply of the
receiver in order to increase the reliability of the current supply even
further. Suitable for various receiver batteries in order to guarantee
an uncomplicated and wide range of application. Even if the battery
voltage is only interrupted for a short time, this is recorded and
displayed in order to counteract an under-dimensioning or even the
failure of the receiver battery with this notice.
• For the operation of one or two receiver batteries.
(Simultaneous discharge with the operation of two batteries)
• Suitable for fi ve or six-cell NiMH or two -cell LiPo or LiFe batteries.
Graupner /JR, G3.5, G2 and BEC plug systems.
• Three adjustable levels for the output voltage for the supply of the
receiver (5.1V / 5.5V / 5.9V).
• Two ultra-bright LEDs show the operating statuses of Battery 1 and
Battery 2 separately.
• Integrated high-quality On/Off switch
• High-current resistant design
• Flatter design of the switch and the LEDS in order to not infl uence
the appearance and characteristics of the model.
• Linear layout of fastening lugs, LEDs and switches for a simple
installation using an accompanying hole template.
GPS/Vario module Graupner HoTT
Order No. 33600
Vario with altitude signals and and fi ve ascend and descend signal
tones as well as integrated GPS with range fi nding, distance
measurement, display of the fl ight direction and the coordinates
Additional warning thresholds for min. altitude, max. altitude, rate of •
ascend and descend in two stages
Altitude display and memory of the min. and max. altitude.
•
Adjustable warning time: OFF, 5, 10, 15, 20, 25, 30 seconds, always •
Adjustable warning repetition time: Always, 1, 2, 3, 4, 5 min, once •
The GPS/Vario sensor can be connected directly at the telemetry •
input of the receiver.
Vario technical data:
Altitude measurement: -500 m … +3000 m •
Resolution: 0.1 m •
Vario sensitivity: 0.5 m/3s, 1 m/3 s, 0.5 m/s, 1 m/1 s, 3 m/s •
programmable by tone
Average calculation: 4 - 20 measurements programmable per
•
measurement value
Appendix