GRAUPNER mx-20 Hott, Programming Manual

Page: 222 / 296

222 Detail program description - Control adjust
After selection of the desired menu line with the arrow
keys

of the left or right touch pad …
TELEMETRY
SETTING & DATA VIEW
SENSOR SELECT
RF STATUS VIEW
VOICE TRIGGER
TEL.RCV rcv ch1
… and then pressing the central SET key of the right
touch pad, the selected submenu opens:
REPEAT
VOICE TRIGGER
REPEAT 1SEC
TRIG
TRANSFER
RECEIVER
–––
–––
VARIO –––
In order to be able to start the voice output through the
headphone connection, at the very least the "REPEAT"
line must be assigned to a switch. The takes place as
described in the section "Switch and control switch
assignments" on page 52:
VOICE TRIGGER
REPEAT 1SEC
TRIG
TRANSFER
RECEIVER
–––
–––
VARIO –––
Move desired switch
to ON position
VOICE TRIGGER
–––
3
–––
VOICE TRIGGER
REPEAT 5SEC
TRIG
TRANSFER
RECEIVER
VARIO
With this switch you can have the last respective voice
trigger repeated for the duration of the time set to the left
of the switch, as long as the assigned switch is closed:
TRIG
With a switch assigned to this line, preferably one of
the two pushbuttons SW 1 or SW 9, switch to the next
voice output in the rotation selected in the options
"TRANSMITTER", "RECEIVER" and "SENSOR" as
described in the following.
1
3
–––
VOICE TRIGGER
REPEAT 5SEC
TRIG
TRANSFER
RECEIVER
VARIO
VARIO
If you activate the "VARIO MODULE" line( ) in the
" SENSOR SELECT" submenu, described on page 220,
you can use the headphone connection to activate a
switch assigned to this line completely independently
of the other voice triggers, in other words voice triggers
triggered by changes in altitude, such as "Slow climb/
descent", etc.
1
3
8
SENSOR
VOICE TRIGGER
REPEAT 5SEC
TRIG
TRANSFER
RECEIVER
VARIO
TRANSMITTER
After selection of the desired menu line with the arrow
keys

of the left or right touch pad...
1
3
8
SENSOR
VOICE TRIGGER
REPEAT 5SEC
TRIG
TRANSFER
RECEIVER
VARIO
… and then pressing the central SET key of the right
touch pad, the selected submenu opens:
TX VOLT:
MODEL TIME:
BATTERIETIME:
TIMER(GE:)CENTER:
TIMER(GE.)TOP:
TIME:
Here, after selection of the desired line with the arrow
keys

of the left or right touch pad and then
pressing the central SET key of the right touch pad,
activate ( ) or deactivate ( ) the data output of the
selected voice trigger: