Copyright 2022 Baker Hughes Company.
English–DPI610E Instruction Manual| 63
Calibrator Task Screen
6. Calibrator Tasks
6.1 Calibrator Task Screen
Figure 6-1: Calibrator Task Screen
1.
Function Name
– name of the currently selected function on the channel.
2.
Primary reading
– measured values that directly represent the channel function
description and displayed in large digits within the channel windows. A secondary
reading can appear in the either channel window. This reading is in smaller digits just
above the primary reading: this shows the measured values associated with the
primary reading of the channel function.
3.
Full-scale value
– each function selected has a maximum measurement capability
which is captured by the positive full-scale value. It is always displayed in the channel
window (with a prefix
FS:
).
4.
Sensor Type
– this applies to pressure or temperature sensors. The pressure sensor
type (Gauge, Sealed Gauge or Absolute) or RTD sensor being used by the channel
function will be displayed in this field.
5.
Process Options
– Any process options that are currently active for each channel is
indicated by process icons in this area of the channel window.
6.
Units
– measurement units of the primary (and secondary reading where applicable)
are displayed in the units field on the right hand side of the channel window below the
primary reading.
7.
Full Scale Bar
– this bar gives a visual indication of the proportion of generated and
measured pressure from the internal sensor of the full-scale range.
8.
Status bar
– the status bar area is present throughout the user interface and provides
date and time information, battery level indication on the bottom right hand side of the
screen. On the left side of the status bar, additional information about remote or
external sensor connection status is provided. Critical information such as calibration
overdue or alarm condition is also displayed within the status bar.
9.
Softkey
– up to four softkeys are available throughout the menu screens giving
touchscreen and button options for operating different aspects of the user interface.
9
9
9
9
1
2
3 4
5
6
1
2
7
3
6
8
Calibrator Tasks
