Copyright 2022 Baker Hughes Company.
138 | DPI610E Instruction Manual–English
Chapter 7. Utilities
7.3 TX (Transmitter Simulation) Simulator
The DPI 610E provides a current output (current source) which is proportional to the pressure
measured and indicated by the DPI 610E. This utility is normally used by the DPI 610E to
simulate a pressure transmitter and it configured by specifying the transfer function parameters
of the current output transmitter to be simulated.
To configure and run the Transmitter Simulation mode:
Step 1
Tap on the
Tasks
icon on the
Dashboard to select the menu.
Step 2
From the
Tasks
menu, select
Tx Sim
from the
Task
list. Tap the
Tx Sim
option again if using the touchscreen or
press the Navigation pad
OK
button to
start the utility.
