Copyright 2022 Baker Hughes Company.
220 | DPI610E Instruction Manual–English
Chapter 12. HART
Step 2
Enter the required output value and
select the
Tick
softkey.
Step 3
On this screen, the current measured by
the DPI 610E will be displayed as the
result of the forced current output from
the
HART
device.
Note
: The signal measured by the
DPI610E is indicated by the icon
,
while that measured by the
HART
device is indicated by the
icon.
Step 4
Repeat as required with all the desired
current output values and check the
measured current value.
To exit the loop test, select the
Back
softkey.
