Copyright 2022 Baker Hughes Company.
192 | DPI610E Instruction Manual–English
Chapter 11. Documenting
The next section describes the components of the
Documenting Main
screen.
Step 4
When the test configuration is complete,
connect the Device Under Test (DUT) if not
done already. A popup message will
appear, to prompt the user.
Select
OK
only when the DUT has been
connected successfully. The screen in
Step 5 will appear.
Step 5
The DPI 610E performs a verification check
to make sure the test requirements and the
DUT connected match. At this stage any
discrepancies will be flagged with the
relevant popup message displayed. For
example, if a pressure sensor (DUT) is
connected which is a different sensor type
to that which the test specifies. Another
example is if the DUT connected has an
incompatible pressure range to that which is
specified for the test.
