Copyright 2022 Baker Hughes Company.
English–DPI610E Instruction Manual | 201
How to redo a Test Procedure
11.8 How to redo a Test Procedure
The instructions in this section relate to doing a Test Procedure again for an existing asset or
Device Under Test (DUT).
Step 1
Select the desired test procedure file from
the list in the
Internal Procedures Files
screen.
Step 2
Select the
Briefcase
(Assets)
softkey
to view the asset details which the test
procedure has been done on.
Step 3
On the Assets screen, view all assets that
this specific test procedure has been done
on and logged.
Note
: Up to 25 Assets and results can be
saved for each calibration test procedure.
To redo the test procedure on the selected
asset or Device Under Test (DUT). Select
the
Play
softkey from this menu screen.
