Copyright 2022 Baker Hughes Company.
English–DPI610E Instruction Manual | 185
INTERNAL PROCEDURES
Step 4
Cont’d
ADJUSTMENT
(
Tolerance
)
:
This sets the
maximum deviation within the
PASS/FAIL
tolerance which indicates that the Device
Under Test (DUT) is close to out of
specification limits.
Hence the
ADJUSTMENT
tolerance value
must be less than the
PASS/FAIL
tolerance
value to be captured. If an
ADJUSTMENT
tolerance is not required, the adjustment
tolerance value can be equal to the
PASS/FAIL
tolerance.
The default value is 0.07% (based on%
FS).
This screen is for the
ADJUSTMENT
value
in the
Procedure: PT_1/Tolerance
screen
on the previous page.
Use this screen to set the way the
maximum deviation is calculated. The four
options for this calculation are given by the
graph in the next row.
