Copyright 2022 Baker Hughes Company.
English–DPI610E Instruction Manual| 87
Functions
6.2.8 RTD
The RTD function enables temperature or resistance measurements to be displayed on the
Calibrator
main reading screen as a primary reading when the RTD-Probe is connected to the
DPI 610E via the RTD-Interface (or RTD-Interface-IS).
When the RTD-Interface connection is detected, the sensor icon is shown in the status bar and
the “Connected” text is briefly displayed to confirm successful connection. Upon disconnection,
the sensor icon will disappear and the “Disconnected” text is briefly displayed to confirm the
connection has been lost.
Step 4
Check that the
Observed
function
appears in the
CH Setup
menu.
Select
to return to the
Calibrator
Main
screen.
Step 5
The
Observed
message will appear in
the top left corner of the screen display.
To select a different unit of
measurement, refer to Section 6.1.1.2
on page 66 for instructions.
