Copyright 2022 Baker Hughes Company.
English–DPI 610E Instruction Manual | 17
Preparing the Instrument
1.12 Preparing the Instrument
1.12.1 Initial Checks
•
Visual check (for cracks/defects)
•
Do not use any equipment that you know is damaged or faulty
•
Ensure the battery is charged (see Section 1.13).
1.13 Battery and Charging
The instrument contains a rechargeable Li-ion battery. To charge the battery, plug the power
supply into the DC charging port located under the protection flap, at the top of the instrument.
The instrument can also be charged from any vehicle with a standard 12 V accessory socket with
an IO610E-CAR CHARGER (optional accessory).
The instrument can be charged while switched on and also when powered off. Battery charge
time is approximately two hours from empty to fully charged.
Figure 1-1: Battery Charging Socket
INFORMATION
When you receive the instrument, check the that the box
contains the items listed in Section 1.2, “Equipment in the Box,” on page 11. It
is recommended that you retain the box and packaging for future use.
Socket
