Copyright 2022Baker Hughes Company.
English–DPI610E Instruction Manual | 213
HART Device Configuration
Step 3
Cont’d
In the
Device Poll
screen the following
information is available:
1.
In the Title bar, the Device Poll
status is provided i.e., Scanning or
Scan Complete.
2.
Poll Address being currently
searched.
3.
Poll Search method or criteria.
4.
Search result table which displays
the Poll Address, Tag and
Descriptor of the device when
successfully found. It can display
up to four found devices.
The scan can be aborted at any time if
necessary, by using the
Stop
softkey.
Restart the scan by selecting the
Search
softkey.
Step 4
When the scan is complete or when the
scan is aborted, any detected
HART
device(s) will be displayed in the table.
If more than one device is displayed,
select the desired device to connect to,
by tapping the device details or using
the navigation keypad.
Select the
Tick
softkey to connect
to the selected device.
Select
OK
to connect to the selected
device and return to the
Calibrator
screen or
CANCEL
to return to the
Device Poll
configuration screen.
Step 4 continues on next page
