Digi HI-700HS, Service Manual, Page: 89 / 324

HI - 700HS service manual - 2 - component parts
2 - 55 Issue 1 02/2020
Take - up motor
Image from Signature labeller
Take - up - 2 way Molex
Wire orientation for L - R labeller
Take - up - 2 way Molex
Wire orientation for R - L labeller
To PL7 on labeller
board
The take - up motor is used to turn the backing paper take - up spool to wind the label rolls backing paper on-
to the spool. The motor drives the spool via a toothed belt and pulleys.
This motor is a 24v DC and obtains it power from the 25v PSU in the labeller. The unit incorporates a gear-
box to obtain the required rotational speed
The motor connects onto the labeller board at PL7 pins 3 and 7
Important note for motor rotation direction on connecting cable form
For L - R labeller the Molex connector on cable form 701 - 0102 will be as standard
For R - L labeller the wires in the Molex connector on cable form 701 - 0102 need to be changed
around
For adjustment and replacement of drive belt and/or motor refer to the servicing section