Digi HI-700HS, Service Manual, Page: 71 / 324

HI - 700HS service manual - 2 - component parts
2 - 37 Issue 1 02/2020
Load cell
The load cell fitted to the scale unit can be either a 15kg or 30kg depending on the specification required for
the scale.
NOTE: these capacities are not the machine/scales capacity. Typically this will be a machine
capacity of 6kg for the 15kg load cell and a machine capacity of 12kg for the 30kg load cell.
The load cell is supplied with a cable gland, fixing
plate and connecting plug fitted to the cable. This
assembly aids replacing this component if required.
Refer to section 4 - servicing for details of replacing
the load cell
HS scale unit
Load cell
Level bubble
Corner stops - set these
for overload protection,
refer to section 1
-
Installation for details
Transit
screw
Transit screw - refer to
section installation for
setting details
Conveyor deck
location pin and
fixing clip