Digi HI-700HS, Service Manual, Page: 158 / 324

HI - 700HS service manual - 4 – servicing
4 - 49 Issue 2 06/2020
LED touch screen assembly - 15’’ version
If the LED touch screen assembly becomes damages or fails to work correctly, follow the procedure below
to gain access to the assembly.
Before starting the disassembly, ensure the machine is shut
down and the power turned off.
To gain access to the screen assembly, remove the 12 hex head
screws around the edge of the rear cover
Important - when removing the screws support the front
assembly (screen) to ensure this does not fall when all the screws
are removed
Lower the front onto a suitable height platform so it can be
unplugged
To lift the screen assembly clear of the machine, the following
connector will need to be disconnected.
Green (power on) LED (2 way connector)
Cables (2 of) to LED screen
Launch button (2 way connector)
Touch panel interface board