Digi HI-700HS, Service Manual, Page: 258 / 324

HI - 700HS service manual - 4 – servicing
4 - 149 Issue 2 06/2020
6. Measure between the
end of the scale deck
and the extra sensor
7. Insert that measurement into the Extra Sensor distance and click the save button
8. Run another pack down the line. The pack should be labelled in the same place with no errors.
9. If you find that the label is slightly out of position as shown below, you may need to adjust the extra
sensor distance slightly (set in step 7) to get it back to the correct spot. In this case reduce it from
100 to 90
10. Make sure a suitable window is set for the speed of the machine using the guide on the following
page. If you need to change remember to click the save button