Digi HI-700HS, Service Manual, Page: 14 / 324

HI - 700HS service manual - 1 - Installation
1 - 7 Issue 2 06/2020
Rated operational conditions for
HI - 700HS
Climatic environment
Temperature - lower limit = 0°C
Upper limit = +30°C
Humidity – non - condensing environment
Intended location – closed (indoors)
Mechanical environment
The mechanical environment classes M1, M2 & M3 are not applicable to this automatic weighing machine
(AWI).
Electromagnetic environment
Conforms to the E2 class
The E2 class is described as:
This class applies to instruments used in locations with electromagnetic disturbance corresponding to those
likely to be found in other industrial buildings.
Programming note
Refer to the user manual for information on inputting programmable data such as plus / label formats.
Note: when programming the fields for printing, it is important to note that under weights & measures
approval there are required fields which must be printed on the label, these are:
Weight
Price per weight unit
Price to pay (when applicable)
All the above to also have the correct unit printed according to the country of use.
In addition, if a (semi - auto) Tare value is printed, the Net weight should be clearly designated as the Net
weight.
Also, if a gross weight is printed, this should also be designated.
If a pre - set Tare is printed, it should be designated as a pre - set Tare (PT) and the same requirements for
Net and Gross designation (as above) applies.
If only a net weight is printed, there is no need for special designation.