Digi HI-700HS, Service Manual, Page: 222 / 324

HI - 700HS service manual - 4 – servicing
4 - 113 Issue 2 06/2020
Signature labeller - fit printer door
Assembly ST3 printer door part number - 707 - 0022 - A
Note: this assembly can be fitted to a L - R or R - L labeller
The instruction below shows a L - R build
Fit ball catch (MM9 - 00215) to catch bracket (701 - 0143 -
A)
Use two M4x10 c/sunk screws plus M4 nut with spring
& plain washers.
Fit catch bracket to side bracket - 701 - 0141 - B (note
position depending on L - R or R - L, lower position is
required)
Use two M5x12 pozi pan screws plus M5 nut with
spring & plain washers
Fit hinge (MM9 - 00124) to door (701 - 0139 - A)
Use M5x16 pozi pan screw (2 for each hinge) plus M5
nylock nut with M5 nylon washer (F82
- 05) & plain
washer