Digi HI-700HS, Service Manual, Page: 56 / 324

HI - 700HS service manual - 2 - component parts
2 - 22 Issue 1 02/2020
Conveyor speed setting - initial factory default setup
The potentiometers in the main electrical cabinet and the labeller electrical cabinet are connected to each
of their respective motor driver board.
The main electrical cabinet will have the infeed & scale, the labeller electrical cabinet will have the outfeeds.
All of these potentiometers do not require any adjustment for installation and speed setting of the
machine, these potentiometers are factory set and locked to their setting.
Component replacement
If a component such as the motor driver, motor or gearhead needs to be replaced, the potentiometer which
is associated to this conveyor may need to be re
- adjusted so that the conveyor speed matched the speed
of all other conveyors on the machine.
Use a tachometer to determine the default speed and set the conveyor which has been serviced to match.