Digi HI-700HS, Service Manual, Page: 66 / 324

HI - 700HS service manual - 2 - component parts
2 - 32 Issue 1 02/2020
Removal of conveyor in HS servo infeed assembly
1
1. Open guides fully wide for both standard
and powered guides,
(see previous page
for adjustment detail).
2. Unclip the four conveyor retaining clips
3. Lift conveyor to access the servo motor
cable connection to the servo motor
4. Un - screw the connector at the end of the
orange cable to unplug the cable from the
motor
2 3
4 5
5. lift conveyor
out of machine
Idler roller
Drive roller
Servo motor
HS servo motor infeed
conveyor
Conveyor belt
tension screws–
see service section
for adjustment
Conveyor location block at
each corner of the deck,
locate these into the pins
Conveyor location
clip bracket