Digi HI-700HS, Service Manual, Page: 106 / 324

HI - 700HS service manual - 3 – routine maintenance
3 - 5 Issue 1 02/2020
Safesleeve Safewand
BE CAREFUL
Do not use any sharp implements to remove
label debris from the thermal head surface.
Apply light pressure upwards along the thermal head and thoroughly clean the surface. Ensure all deposits
are removed.
If removed, refit the label roll paper, close the print head assembly back into position & return the applicator
back to the head assembly and latch into position.
Cleaning the thermal head - Signature & Classic labellers
Lift the thermal head assembly by turning the black
hand lever.
Using the same process as previously described to
clean the thermal head
Clean thermal head surface –
BE CAREFUL
Do not use any sharp implements to remove label
debris from this surface.
Close the thermal head back onto the labels/
platen roller, feed labels and check print quality
Thermal head cleaning on Classic labeller