Digi HI-700HS, Service Manual, Page: 24 / 324

HI - 700HS service manual - 1 - Installation
1 - 17 Issue 2 06/2020
Removal of conveyor (to gain access to transit screw)
The transit screws fitted to the scale for protection during transit needs to be released.
Readjustment of the screws may be required to ensure a correct gap to act as limit stop screws in the up
direction.
The conveyor can now be remove from the machine
1. To gain access to these screws remove
the conveyor for the scale.
Remove conveyor by releasing the four
side clip
2. Unclip motor connection - turn the locking
ring about 1/2 turn the release and unplug
connector
3. Lift up the conveyor enough to gain
access to the scale area and unclip the
retaining clip for the motor wire, lift black
clip to release
1
2
3