Digi HI-700HS, Service Manual, Page: 127 / 324

HI - 700HS service manual - 4 – servicing
4 - 18 Issue 2 06/2020
Outfeed conveyor for base labeller -
idler roller removal
One or both Idler rollers can now be removed.
Inspect condition of roller assembly, check for smooth
rotation, replace if required
Idler roller assembly - 718 - 0009 (x2)
Drive assembly
The two drive rollers are driven by the single motor and
gearhead assembly
To gain access to the drive assembly, remove the drive
cover by loosening the four screws at the side.
Note: these screws are captive to the motor bracket and
therefore do not need removing