Digi HI-700HS, Service Manual, Page: 164 / 324

HI - 700HS service manual - 4 – servicing
4 - 55 Issue 2 06/2020
Signature labeller servicing
Thermal head 80mm
565 - 743
Thermal head 108mm
EX0 - 00030
Silicone tube - 701 - 0047
Wear strip - 701 - 0048
Platen roller - 701 - 0051 (option fit)
Pozi
head
Cap
head
M3 0.7 1.2
M4 2.1 2.6
M5 4.5 6.0
M6 ——— 13.5
Signature labeller
Torque wrench settings - Nm
Thermal head pneumatic pressure
Standard values are:
80mm wide thermal head = 0.25 to 0.3 MPa
(2.5 to 3.0 Bar)
108mm wide thermal head = 0.3 to 0.35 MPa
(3.0 to 3.5 Bar)
Increasing the pressure up to a maximum of
0.4 MPa (4.0 Bar) may be required for certain
label types