Altigen AltiContact Manager Version 5.0A, Administration Manual

Page: 185 / 578

Board Configuration
AltiContact Manager Administration Manual 6-3
6. Board
Co
nfi
g
u
rat
io
n
Use the Board Configuration window for the Quantum board to view the
following attributes:
Parameter Description
Board Info Board Logical ID : assigned by AltiContact
Manager.
Board Name : the type of board installed in the
system and board ID.
Note: For Quantum boards in a Windows 2000
system :
•
the physical board ID 0 is not supported
•
the valid physical board IDs are 1–15
Channel Mapping
List Logical Channel , Physical Span , and Physical
Channel for the entire board.
To reset the channel, select the channel to reset and
click the
Reset Channel button, then click OK .
Note: Depending on whether the channel is a line or
a trunk line, double clicking a channel in this
window invokes either a Line Properties
window (see “Quantum Line Properties” on
page 14-11, or a Trunk Line Properties
window (see “Quantum Trunk Properties” on
page 7-6).
Span Info Not available for Quantum boards.