Stanford Research Systems SR785, Руководство по эксплуатации и программированию

Страница: 381 / 546

Output Menu 4-185
SR785 Dynamic Signal Analyzer
ASCII Dump
Dump the data in the active display in ASCII format to the selected Destination
(Interface or Disk). The data is written f,y,x[cr] with the data for each point on a single
line. f is the frequency or time value, y is the y-axis value and x is the x-axis value (if
necessary).
Other front panel operations are disabled until the dump is completed. Pressing
backspace will abort the operation.
Command: DUMP
Bitmap/Printer
Select the Bitmap/Printer type for the Bitmap/Print operation [Epson FX, HP PCL, HP
Small PCL, PCX 2 bit, GIF, PCX 8 bit].
Epson FX is used for Epson compatible dot matrix graphics printers.
HP PCL and HP Small PCL are used for HP LaserJet or InkJet compatible printers. HP
PCL is a full page printout and HP Small PCL is half page.
The PCX and GIF types are bit mapped file formats. Choose one of these if you want to
print to a disk file and import the image into a PC application.
The Destination for all Bitmap/Printer types can be either an on-line Interface or a Disk
file.
Command: PRTP (?) {i}
Bitmap Area
Select the portion of the screen for the Bitmap/Print operation [Graphs, Menu,
Indicators, All]. Vector/Plot only plots the displayed graphs.
Graphs prints the graph areas. This is a single or dual graph.
Menu prints the menu of softkeys.
Indicators prints the status indicators at the top of the screen.
All prints the entire screen image including the menu softkeys and status area.
Command: PSCR (?) {i}
Vector/Plotter
Select the Vector/Plotter type for the Vector/Plot operation [HPGL, Postscript].
Vector/Plot only plots the displayed graphs.