Stanford Research Systems SR785, Руководство по эксплуатации и программированию

Страница: 498 / 546

5-98 Output Commands
SR785 Dynamic Signal Analyzer
PBRI (?) {i}
The PBRI command sets (queries) the print density of highlighted areas. The
parameter i selects White (0), 6% (1), 12% (2), 25% (3), 50% (4) or Black (5).
PDIM (?) {i}
The PDIM command sets (queries) the print density of normal areas. The
parameter i selects White (0), 6% (1), 12% (2), 25% (3), 50% (4) or Black (5).
PBLK (?) {i}
The PBLK command sets (queries) the print density of black text. The parameter
i selects Black (0) or White (1).
PGRF (?) {i}
The PGRF command sets (queries) the graph print mode. The parameter i selects
Black on White (0) or White on Black (1).
PLOT
The PLOT command plots the graph displays using the selected Vector/Plotter
type and Destination. All other operations are disabled until plotting is
completed.
PLTP (?) {i}
The PLTP command sets (queries) the Vector/Plotter type. The parameter i
selects HPGL (0) or PostScript (1).
PLTA (?) {i}
The PLTA command sets (queries) the Plotter GPIB Address. The parameter i
ranges from 0 to 30 and should agree with the address of the plotter in use.
PCIC (?) {i}
The PCIC command sets (queries) the GPIB Control mode. The parameter i
selects Host (0) or SR785 (1).
PLTX (?) {i}
The PLTX command sets (queries) the Plotter Text Pen Number. The parameter
i is a pen number from 1 to 8.
PLGD (?) {i}
The PLGD command sets (queries) the Plotter Grid Pen Number. The parameter
i is a pen number from 1 to 8.
PLTR (?) {i}
The PLTR command sets (queries) the Plotter Trace Pen Number. The parameter
i is a pen number from 1 to 8.
PLMK (?) {i}
The PLMK command sets (queries) the Plotter Marker Pen Number. The
parameter i is a pen number from 1 to 8.