Stanford Research Systems SR785, Руководство по эксплуатации и программированию

Страница: 461 / 546

Input Commands 5-61
SR785 Dynamic Signal Analyzer
I1AW (?) {i}
The I1AW command sets (queries) the Ch1 A-Weighting Filter Off/On. The
parameter i selects Off (0) or On (1).
I2MD (?) {i}
The I2MD command sets (queries) the Ch2 Input Mode. The parameter i selects
A (single-ended) (0) or A-B (differential) (1).
I2GD (?) {i}
The I2GD command sets (queries) the Ch2 Input Grounding. The parameter i
selects Float (0) or Ground (1).
I2CP (?) {i}
The I2CP command sets (queries) the Ch2 Input Coupling. The parameter i
selects DC (0), AC (1) or ICP (2).
I2RG (?) {x} <[dBVpk], dBVpp, dBVrms, Vpk, Vpp, Vrms, dBEUpk, dBEUpp, dBEUrms, EUpk,
EUpp,EUrms>
The I2RG command sets (queries) the Ch2 Input Range. The parameter x is the
full scale input range in the specified untis. If the exact input range specfied is
not available, the closest available input range will be used.
The query command returns a value of the form x,j where x is the value and j is
the index into the list of units.
If Ch2 AutoRange is On, the I2RG i command will turn Ch2 AutoRange Off and
the set the Ch2 Range to f.
I2AR (?) {i}
The I2AR command sets (queries) the Ch2 AutoRange Mode. The parameter i
selects Normal (0) or Tracking (1).
A2RG (?) {i}
The A2RG command sets (queries) the Ch2 AutoRanging Off/On. The
parameter i selects Off (Manual) (0) or On (AutoRanging) (1). If i=1 and Ch2
AutoRange is already On, a new AutoRange is performed.
I2AF (?) {i}
The I2AF command sets (queries) the Ch2 Anti-Aliasing Filter Off/On. The
parameter i selects Off (0) or On (1).
I2AW (?) {i}
The I2AW command sets (queries) the Ch2 A-Weighting Filter Off/On. The
parameter i selects Off (0) or On (1).
IAOM (?) {i}
The IAOM command sets (queries) the Input Auto Offset Off/On. The parameter
i selects Off (0) or On (1).