GEA Omni, Инструкция по эксплуатации

Страница: 87 / 238

• Back up to Panel
This button is used to save the current values of all custom parameters on the panel to an .oprms file
in the GEA RT folder on the panel hard drive. If such a folder does not exist, it will be created auto-
matically. The default name of the file is the number of the configuration, but a custom name may be
entered into the text field above the button.
• Restore Parameters
This button is only available if a file is selected in the table to the left. Touching it will load the param-
eters in the selected parameter file to the panel.
• Delete Parameter
This button is only available if a file is selected in the table to the left. Touching it will erase the
selected parameter file from the USB or panel.
2.13.2 Documents Tab
fig.88: Documents tab display
This tab is used to move supplementary documents to or from the panel, such as manuals or instructional vid-
eos. The green bar in the upper right hand corner of the screen represents the current available panel memory.
1.
Copying Files to the Panel
The list in the upper portion of the screen displays all files available to be copied to the panel’s memory.
Whenever a USB is plugged into the panel, any files of a panel compatible type type will be displayed. Files
that may be copied are .pdf documents and videos of .wmv, .avi and .mp4 formats. Each row in the list con-
tains the name of the file, the file size and a checkbox used to select the file. To copy files, the row corre-
sponding to each desired file must be checked. Alternatively, the table has a
Check All button which will
allow the user to select every file on the USB. As long as at least one row is checked, the Copy File(s) button
shown to the upper right of the table will be enabled. Touching this button will save a copy of all selected
files into the panel’s memory.
Instruction Manual | GEA Omni™
Control panel User interface
File Manager
GEA Refrigeration North America, Inc. | E_806550_2 | Generated 12.01.2016 87