Touching the condenser sequencing tile will open the overview screen for the condenser. Refer to Sec-
tion 2.6, Page 37 for full details on condenser control.
3.
Evaporator
fig.20:
Evaporator Tiles
These tiles each correspond to an evaporator zone.
Each tile displays the name of the evaporator, the
current zone temperature. Depending on the cur-
rent status of the zone, the tile will also display
either the time remaining on the defrost cycle or the
temperature set point the zone is in the process of
cooling to. The zone status is indicated by the color
of the tile. The colors are:
•
Light Blue:
Tiles of this color indicate that the
associated zone is in cooling mode.
•
Dark Red:
Tiles of this color indicate that the
associated zone is currently in defrost mode.
Touching any tile will open the evaporator screen for the selected zone. Refer to Section 2.7, Page 46
for full details on evaporator operation.
4.
Control Level (for compressor sequencing)
fig.21:
Control level tile
These tiles each correspond to a control level for
use in compressor sequencing. The information
displayed on each tile, from top to bottom, includes:
•
Control value
•
Set point
•
Status
•
Current step
•
Compressors running
•
Compressors available
Touching any control level tile will open the overview screen for the sequencer. Refer to
Instruction Man-
ual
Section 2.8, Page 50 for full details on compressor sequencing.
User interface
OmniView
Instruction Manual | GEA Omni™
Control panel
28
GEA Refrigeration North America, Inc. | E_806550_2 | Generated 12.01.2016
Содержание Omni
Страница 1: ...Control panel GEA Omni Instruction Manual E_806550_2 ...
Страница 238: ......
