GEA Omni, Инструкция по эксплуатации

Страница: 44 / 238

This option is only available for variable speed devices. Whenever it is selected, the device
will continue to run at its current speed during the associated step.
– Auto
This option is only available for variable speed devices. Whenever it is selected, a percent-
age value may be entered, corresponding to a percent of the device’s maximum speed. The
device adjusts its speed automatically to match the chosen value and continue to make
adjustments to maintain the chosen value during the associated step.
6. Control buttons
fig.38: Condenser control buttons
These buttons are used to control the sequencer. The buttons are:
a. Auto
As long as this button is illuminated, the sequencer will run automatically based on the values
entered in the three timer columns.
b.
Hold
As long as this button is illuminated, the sequencer will remain on the currently selected step.
c.
Next
When this button is touched, the sequencer will immediately switch from the current step to the
next step below it in the table. If the sequencer is already on the final step, touching this button
will have no effect.
d. Previous
When this button is touched, the sequencer will immediately switch from the current step to the
previous step above it in the table. If the sequencer is already on the first step, touching this
button will have no effect.
The values in the table display may be modified by touching the appropriate cell of the table. When-
ever a cell containing a timer is touched, the sub-window below will be displayed.
User interface
Condenser Instruction Manual | GEA Omni™
Control panel
44 GEA Refrigeration North America, Inc. | E_806550_2 | Generated 12.01.2016