R&S SMJ100A, Operating Manual

Page: 778 / 874

Remote Control Commands
R&S
®
SMJ100A
762 Operating Manual 1403.7458.32 ─ 14
Parameters:
<Source> INTernal | EXTernal | INT,EXT
INTernal
Uses the internally generated signal for modulation. To configure
the LF signal, use the commands of the
SOURce:LFOutput Sub-
system subsystem.
EXTernal
Uses an externally applied modulation signal.
INT,EXT
Uses both, the internal and external modulation signals.
*RST:
INT
Example: PM:SOUR INT
selects the internal modulation source.
Manual operation: See "
ɸ
M Source" on page 249
[:SOURce<hw>]:PM:STATe <State>
Activates phase modulation.
Note: Activation of PM deactivates frequency modulation (FM).
Parameters:
<State> 0 | 1 | OFF | ON
*RST:
0
Example: PM:STAT ON
activates PM.
Manual operation: See "State" on page 249
7.16.15 SOURce:POWer Subsystem
This subsystem contains the commands for setting the output level, level control and
level correction of the RF signal.
Other units can also be used instead of dBm:
●
by entering the unit directly after the numerical value (example
:POW 0.5V
)
●
by changing the DEFault unit in the
UNIT
system (see the command
:UNIT:
POWer
).
[:SOURce<hw>]:POWer:ALC:OMODe
............................................................................. 763
[:SOURce<hw>]:POWer:ALC:SONCe
.............................................................................. 763
[:SOURce<hw>]:POWer:ALC[:STATe]
............................................................................. 763
[:SOURce<hw>]:POWer:ATTenuation:RFOFf:MODE
.........................................................764
[:SOURce<hw>]:POWer:EMF:STATe
...............................................................................764
[:SOURce<hw>]:POWer[:LEVel][:IMMediate][:AMPLitude]
..................................................765
[:SOURce<hw>]:POWer[:LEVel][:IMMediate]:OFFSet
........................................................765
[:SOURce<hw>]:POWer[:LEVel][:IMMediate]:RCL
.............................................................766
[:SOURce<hw>]:POWer:LIMit[:AMPLitude]
.......................................................................766
SOURce Subsystem